Sell surplus draft inducers and blower motors

Selling inducers and blower motors

What we buy and how it works

We buy draft inducer assemblies and furnace blower motors: the complete inducer with its housing and wheel, the bare inducer motor, and the PSC and ECM blower motors that move the air. Aftermarket units from the motor makers and the OEM assemblies that carry a furnace manufacturer's number. New in the box, truck stock that was never fitted, or pulled from working equipment at a changeout. One motor or a contractor's back room. Email the number stamped on each motor and the OEM number from the box or the housing label, with a photo, and you will have an offer within two hours. The valuation is free and there is no obligation. If you accept, we send a prepaid label, and you are paid the day the shipment arrives.

What we pay for

Complete inducer assemblies with housing, wheel and gasket, inducer motors on their own, and blower motors of every type: PSC, X13 and the constant-torque and variable-speed ECM motors with their control modules. Also the parts sold with them: ECM control modules on their own, blower wheels and housings, capacitors, mounting brackets and the pressure switches that ship with some assemblies. If the control board or condenser fan motor came off the same unit, send those numbers in the same email.

Brands we buy

Fasco A and U series inducers and the 70 series blowers. GE and Genteq 5SME and 5KCP motors, the X13 and ECM 2.3 and 3.0 ranges with their modules. US Motors and Nidec, Jakel, Rotom, Packard and A.O. Smith Century. OEM inducer and blower assemblies carrying a Carrier, Bryant, Payne, Trane, American Standard, York, Coleman, Luxaire, Lennox, Armstrong, Goodman, Amana, Rheem or Ruud number. Every brand we take is listed below. If yours is not there, send the number anyway and we will tell you either way.

Send both numbers: the motor and the OEM cross-reference

An inducer or blower usually carries two numbers for one part: the motor maker's number stamped on the housing, such as Fasco A227 or Genteq 5SME39HL0252, and the OEM number for the furnace it fits, such as York 024-27641-000 or Carrier HC23CE116. Buyers search either, so send every number you can find on the motor, the housing label and the box. Say whether you have the motor only or the complete assembly with housing and wheel, because they are listed differently. For ECM motors, send the module number as well as the motor number if the two are labelled separately.

New and used

New motors and assemblies in the box, bought as truck stock and never fitted, are the easiest to price. We also buy units pulled from working furnaces when the equipment was replaced for its age. Say which it is. For a pulled unit, tell us that it was running when removed, whether the wheel and housing are with it, and photograph the motor label and the wheel.

Where inducers and blower motors come from

HVAC contractors replace whole furnaces long before every motor in them has worn out, and the good inducers and blowers come back to the shop. Distributors clear truck stock when a model is superseded, and OEM assemblies are left over when a service call turns into a replacement. Those shelves of pulled motors and unopened boxes are what we are asking you to send.